Ok, so it’s been about 13 years since I have posted. Picked my 911 up from a friend for 5k in 2006 as he was terribly frustrated with an intermittent ignition issue. I solved it with the help here by installing an MSD and Magnacore wires. Since then, I have only put 4K miles on it. Basically, just stored it, starting each month and running around the neighborhood. I had been looking for a project, specifically an older Bronco or Land Cruiser. Decide I would make this 78 911SC my project. Enough back story...
Figured I would replace the shocks on all corners. Been reading thread after thread about the front inserts and it is rather confusing. But, after inspection, I believe I have the Bilstein fronts. The strut is green and I have the roll pin. So, want to confirm this is what I have so that I order the correct parts. And need some advice on removing these pins. Gonna try to post a couple pics of what I’m looking at. Thanks for the assistance in advance.
