Quote:
Originally Posted by Fairview
Been a few months since I’ve done the strut inserts, but read the tutorials and you’ll be pleasantly surprised how easy this is to do.
The roll pin drives out without much drama, just use a punch the same diameter or slightly smaller.
Yes those are Bilsteins.
|
Thank you for the reply Fairview. I had read the tutorial by the host. Wasn’t sure if the pin was directional and had to be removed a certain direction. It also said it could be drilled out. Would rather tap it out, but having not done this before, was looking for the method that would generally work. I appreciate the feedback and will get things ordered prior to removal. Thanks again and take care