Hello:
Just need some advice. This is a picture of the front driver side torsion bar cap. The adjusting screw is backed out as far as it can to lower the front of car. Unfortunately, I would like to lower the front another 1/2 inch. So in order to do so, do I remove the torsion bar cap and rotate it CCW? If so, do I tighten the adjusting screw all the way to the top? Once back on the ground, will backing the screw out again give me the adjustment to decrease the ride a bit more?
The passenger side still has room for backing out the adjusting screw.
Thanks ahead of time.....
