[va011101]

A couple of thoughts:

At one point, my R11S was vibrating at idle enough to make the glass in the mirrors rattle. I had previously used a vacuum liquid carb balancer and once I used a Twinmax, the idle was smooth. No rattle in the mirrors at all. My point is that if you are using a liquid balancer, you might try an electronic type.

Another idea, which only applies when riding, is phasing the driveshaft. If you changed your clutch, you most likely pulled the shaft off of the final drive. When you reassembled, did you phase the shaft properly? I have never personally experienced an out-of-phase shaft, but understand it can be quite a vibration. If you didn’t phase it correctly or don’t know, it’s fairly easy to check by shining a light into the swing arm.

Cheers!