|
There are lots going in that place.
I suggest against spray form if its going to be use as a general shop. spray foam traps lots of dirt and you can't get it out once the dust settles in. The walls must be covered. I really like rigid foam, great insulating value easy to cut and install. We cut it with a table saw when we did my house. Since that's something we do not install, there's no need for fancy tools just to cut the simple foam. Drywall or cheap paneling on top of that to keep the dirt out. I know humidity is high in TX. That will ruin your tools so a coat of oil is a must on all your cast iron table tops when not in use.
|