Quote:
Originally Posted by TrickySF
Thanks Timmy2 for the reply. I have a new Classic Retrofit A/C blower that I just plugged in and the new blower also has but one speed in the same position of the fan slide (medium, no low and no high), so it is not the blower. That leaves the control panel slide or the wiring/plug between the control panel and the blower. I will remove the control panel again (hate to do it) and check the continuity between the three fan positions and the plug under the dash and/or check voltage coming from each prong of the four prong plug in the frunk that plugs into the blower-with the fan slide in the proper fan speed positions. Any thoughts?
|
Is the retro ac supposed to have multple fan speeds from the switch, I've just ordered mine and figuring out if I need to replace the heater control because mine is doing the same thing.