|
I removed my sender after connecting the 2 wires hooked to it and saw the Needle go the top of the gauge. Now, I have the Sender disassembled on my bench and want to test the Ohms. I'm not electrically inclined but this is what I think I am supposed to do: Connect the + probe to the Center connector and the - probe to the mounting plate. As I move the float I can see 12. +/- at one extreme and around 108 +/- at the other. Is this telling me the Sender is working as it is supposed to? (BTW, before all of this, when I turned the ignition ON, the needle would rise about 1/4".) Now, I fear I removed it for no reason and merely need to wait for the front oil cooler T'Stat to open to get a good reading ;-)
Thanks -
|