Quote:
Originally Posted by biosurfer1
Not sure if it makes a difference or not, but I still bed my pads and rotors when I get new ones. Some manufacturers list procedures but usually they are something like 30-0 easy stop, 60-0 easy stop, 40-0 hard stop, 60-0 hard stop.
Has worked for me over the years.
|
Oddly enough, I've never had to bed pads/rotors before. But after putting these on and they didn't settle down immediately I did a bedding procedure.
I think the theory is to get them to a temp where the pads get so hot that they put a coating on the rotors. The instructions say it may even take two attempts. It didn't work in this instance.
I replaced pads on this vehicle a few years ago. No bedding, no issues.