[fastfredracing]

I always clean the caliper pistons, and the area where the pads ride in the calipers. I then, put a light smear of brake caliper lube on those surfaces. Anti Seize is not preferred here .
I also make sure that all slides are free , and move with equal force, and I try to pay attention when I am sliding the pistons back in the bore to see if there are any sticky caliper pistons.
If they are Brembo that came with the little isolator pads, , they need those , or they will make noise .
If none of this works, I just advise the customer to turn up the damn radio