Quote:
Originally Posted by hcoles
Okay, thanks. This may take awhile. Please stand by.
Side question.. Can a circular saw with a track system cut the plywood accurate/straight enough or do I definitely need to use a table saw?
|
Info.
I'm replacing a three piece set that needs a wider unit in the center to accommodate a 65" TV. The current set consists of three units (center 42" and two at 36"). Each on 4 bun feet. The overall width with 2" or so gaps is 10 feet. I'm thinking the new center piece needs to be 69" wide. The two "side" units would then need to be 23" wide. The center unit is 24" deep and the side units are 20" deep. The new center section can be 7' high if I'm going to have a "hood" over the TV. It could be that the center section will end up being just a cabinet with a top at about 40" high. That would save needing to build the "hood". I can then attach the TV to the wall.