[Harpo]

This has been an exercise in patience. I had to wait 3 weeks for USPS to deliver these 930 calipers. Yes this is the wrong caliper and that's why I mounted it upside-down. The correct caliper is still being cleaned in the ultrasonic tank. I didn't use the 930 caliper spacers ( 930.351.581.01) as others have done. Instead I used 4.4mm thick washer from the hardware store (way cheaper). Also with the 951 rims I didn't have to add spacers between the hub and the wheel. This also means that the rims I just got back from powder coating can't be used. These are the newer caliper design with out the banjo fitting. Not sure if I will have to back date the calipers