Quote:
Originally Posted by easyed8
Concerning your 930 intermittent starting issue.
I would double check the plate height in the air flow housing and make sure it is set to the correct position. i believe that is - the plate even with the edge of the venturi. On cranking of the starter causes downward movement and activates the pumps. It is
important that the plate is in the correct position.. Perhaps also check the relay for the
air sensor and maybe the charge pressure switch in the intake.
best of luck with this, you deserve it!
Easy ED
PS: unplugging the safety switch is another option and quick check !
|
Thanks, will add to my to-do list and post findings after I try again with 6-pin CDI installed