Quote:
Originally Posted by javadog
There is a way to use some basic carpentry tools and a little measuring and layout work to determine a point directly below the outlet that would be a good starting point for an investigative access hole to be drilled. It would take an hour for me to type it all but if you want to try it, let me know and I'll work on it.
|
I find using a Self Leveling Combination Laser Level (available at HD) is very helpful. Measurements taken from inside the tank, can be translated to the outside of the car using a laser level. However be sure to set a datum line on your garage floor that is perpendicular to the x axis centerline of the car.
The datum line should be the centerline of the tank sending unit opening, or some other reference point.