Quote:
Originally Posted by gomezoneill
Back in the 70's at a dealership I'd use an air chisel or or a chisel and hammer to loosen the bolt by setting the chisel on the face and digging it in, always broke them loose. Lot's of times the allen head was stripped out.
|
Great idea. I got them out. Three were stripped inside the Allen socket and would not break lose even with vice grips. Ran up to the local auto store and bought these:
Absolutely worked like magic. Tapped them on with a hammer and even at an angle it backed all 3 out on the first try. The kit was a bit pricey $50 but they are well made and will make my life easier in the future. For this application you only need the 10mm socket.