Quote:
Originally Posted by honerboys
according to diagrams the battery cable runs to the jump post then another cable runs from the jump post to the starter - can you start the car with your bench charged battery connected to jump post? - if so i'd say your problem is between the battery and jump post - you mentioned splicing wires somewhere - are the spices good? - also between battery and jump post there appears to be a large fuse - says it's down above the battery - also something called a battery sensor ..not sure what that does or if it must be reset after dead battery? - here's what i got
 |
The splices are those common ones in the footwells that get wet, so we started there.
The battery is new, but when its plugged in (ground cable connected) it won't start. If I unhook that cable, and use the posts in the engine, it fires right up. I will use your schematic and dig a bit deeper. Thanks so much!!