[rangrbob]

I recently purchased a Classic Retrofit fuse block upgrade for my 71. After installing it and confirming all the wires were attached to the same positions they came off the old fuse block, I reconnected the batteries and tried all the switches. Most everything worked the way they should, however, there were a few issues.

The low beams would flash when hazard warning lights were activated.

When the right turn signal was initiated, the headlights and fog lights would flash as well.

When the high beams were on the fog lights and right rear brake light would come on as well.

The high beams would stay on even if I pulled their fuses.

All grounds where checked and were good, and I double checked the wiring with photos and the wiring diagram.

I removed it and re-installed the old block and everything works the way they should. Since electrical parts are not returnable, I’m hoping the community may be able to help. I’d hate to have wasted $400.00.


Any thoughts or ideas where to look would be appreciated.

Thanks