Quote:
Originally Posted by Hx911
I have the same issue - the fuses seem to be just that bit to high in their sockets, for the cover to fit properly. In my case - the previous owner has fitted some velcro to hold the fuse cover in place, so now with the Classic Retrofit fuse panel fitted I just do not clip the cover in at the bottom.
Maybe there are some fuses that are not as height, or it needs a change in design in the future to accept the smaller size blade fuses. not sure it this is possible though
|
There is a couple of mm clearance from top of fuse to underside of cover.
It's more likely that the bottom clips are not seating. Have a look at the wires on the bottom row and make sure none are in the way of the two slots in the metal bracket.
There are hundreds of fuse panels in service with covers fitted. We supply fuses with all our panels and they have not changed in height.