|
Brake Stuff
A couple of questions:
1. I have fitted BMW calipers and a 19mm 911 Brake master cylinder to my US spec 1974 1.8. Everything has gone together fine except I have apparently purchased the Euro spec master which does not have a housing for the pressure sensor. Is this a problem?
2. One of the rear calipers is leaking from the handbrake actuating mechanism despite the fitment of a new seal kit. I am not sure which seals were replaced as this was done by previous owner. Will I have to replace the caliper or are there any seals that might have been missed?
Any thoughts and suggestions gratefully received.
|