[masraum]

Originally Posted by Baz

OK, then cut the pipe after the elbow leaving enough pipe for a new coupling - hopefully at least 2".

Then take everything off going up into the tee.

Replace with a female adapter and (2) 45's to get the pipe to the right level.

Those are called 45's. Not 135's.

Is that 1" or 1 1/4" pipe, Steve?

You'd want to get schedule 40.

Have you worked with PVC pipe before?

The horizontal pipe coming from the elbow is also split. I'm afraid that I'd need to cut the very top of the vertical portion just below the elbow, then install a new elbow, new straight portion and the 45s and then the gray pipe that screws into the metal T with the faucet.

Thanks, 45, not 135.

It's just over 1 1/4" OD, so I believe that means that it's 1" sched 40.

schedule 40, thanks.

I've done some pvc before, mostly under sinks, and for the A/C drain pan pipe. I've worked with this stuff before.