[yelcab1]

In case anyone is looking for procedures of pulling the PS pump in-situ

1. Remove 4-5-6 header
2. Remove metal cover for the PS belt bracket
3. Remove engine side tin for 4-5-6 side
4. Remove the large bolt holding the pulley to the cam shaft with a stubby air impact wrench (buy one)
5. Remove the four NUTS holding the pump on. Access from the top of the engine (not the bottom), use mirror, go by feel, you have enough room for a 3/8 rachet (3 or 4 degree movements) and long 13mm socket
6. Detach the front bracket to the left - bottom front of the pump
7. Wiggle pump out.

Not fun, but doable if you know the secret steps.