[Tidybuoy]

Originally Posted by 1990C4S

What size wire did you run?
I don't have the specifics here at work but will check tonight. I think it is either 6 or 8 guage. it's very thick and is the exact 220v wire that I used for my dryer which was the correct guage when I did that a few years ago (got advice from an electrician then)

I think you are probably 100% fine for safety...not sure about code. Did you run 'liqui-tite' conduit with proper fittings at each end? How is it secured to the house?
I'm not sure if it is liguid tight and you can see it in the photo below as well as the 220v wiring. This is secured to the floor joists under the house and is about 2' off the ground (exactly the same as the original wiring).

You wired from the breaker to the new box, right? Not an extension from the old box?
Correct - one end connected to breakers and other end connected to outlet box

Is the underside of the house 'exterior' or 'basement'?
Not basement but a crawl space


A pic might be good.