Quote:
Originally Posted by JoeMag
Interesting the 993 cams are not same diameter all the way out... after market cams i've gotten and 964 cams i had are same diameter all the way out.
How many shims were on it when you took it apart? Did you just take cam boxes off and left rest of system (cam tower, heads, etc) on the motor?
|
Same size all the way to the end would be helpful right about now.
Correct I just took the boxes off to replace the gasket and orings.
Both sides only had 2 shims, but I just don’t see how that can work correctly on the left side.