Quote:
Originally Posted by HardDrive
The only wrinkle here is that you want to print flexible material, so you will need a direct drive.
|
Not all TPUs are the same. I went with a higher durometer TPU from Sainsmart to print custom carb intake boots. It is a 95A shore durometer and prints fine in a stock Ender.
If you want really squishy stuff then you will probably need the direct drive mod.
.
__________________
"The primary contribution of government to this world is to elicit, entrench, enable, and finally to codify the most destructive aspects of the human personality."
Jeffrey Tucker
|