|
3.2 no oil pressure after top end rebuild.
Helping a buddy of mine who did a top end rebuild (one of many, so experienced) on a 3.2.
On start-up, there is no oil pressure. There is oil in the "S" hose from the tank. Pulled the cam feed line, and just drops of oil.
Checked the pressure relief and safety valve.
Checked the gear on the oil pump with USB cam - running.
Oil cooler was replaced, but even if this should somehow be blocked, it should be bypassed when cold.
Thermostat and everything else left untouched - just top end. The problem was not there before the rebuild.
Any ideas?
Thanks Claus
|