|
Very Old Thread Alert.... :-)
My situation - pass window doesn't go up or down with either switch in either direction.
I turn on the key and I get 12v at 4 places on the pass side switch.
I get 0 ohms from the brown wire to the door pivot pin.
Key off - I get 0 ohms in one direction and about 2.0 ohms in the other direction on both blue wires rel. to the brown wire. I think this is because I'm reading the motor resistance in one direction.
Not sure what to try next. Any ideas?
Thanks.
-Henry
__________________
Sold: 1989 3.2 coupe, 112k miles
|