|
Wer bremst verliert
Join Date: Jan 2005
Location: Toronto, Ontario
Posts: 4,767
|
Wow, thanks so much for taking the time and responding so thoughtfully.
I flipped the plates so the slot is on top, and moved the pivot to the center bolt location. I guesed at the camber bolt orientation (the factory ones fit) and the settings were almost bang on.
LR -2.4 Camber 0 Toe
RR -2.9 Camber 6mm total toe out
This is a 90% track car, 225/50R16 Bridgestone Potenza RE-71R
I was thinking to put the good schorr washers and hardware in and shoot for -3.2 camber. Toe suggestions? Mike I see your .75 to 1.0 note but I think my tires are a lot different?
Was tinking 1/8 to 1/4 toe in rear total, 1/8 total toe out in front?
Hoping to get things buttoned up on the geometry front tonight and do some corner weighting and EFI tuning tomorrow.
__________________
2007 911 Turbo - Not a toy
1985 911 Cab - Wife's toy
1982 911 3.2 Indiash Rot Track Supercharged track toy
1978 911 3.0 Lichtbau toy "Gretchen"
1971 911 Targa S backroad toy
Last edited by JohnJL; 06-11-2021 at 06:05 PM..
|