Quote:
Originally posted by Taz's Master
My bracket is held on with bolts other than typical 6-point bolt heads, I'm assuming allen bolts. This little aspect of the car's construction is not endearing the vehicle to me. Any clue as to the size of the allen bolt, and any hints as to how best to remove them so that I can get the sensor out? I am very frustrated now, as I cannot see how I will be able to reach the bolts with either the proper allen head socket, or one of the L-shaped keys.
|
If memory serves the cap head screws require an M5 allen key.
What you need is a quarter inch drive socket set - preferably with one of those woven wire flexi-drive extensions (so you can reach in amongst all those obstructions) plus a range of allen key sockets. Not expensive and it'll prove very useful around the car.