[fastfredracing]

Now that you have some pedal, you should be good to go. When you come back from your little hissy fit ( I take them also ) , don't touch the bleeder, just sit in the car and pump the clutch pedal over and over till it feels normal again .
Once you get mostly normal pedal, Id just crack the bleeder and see if you get a bubble or two out.
Timely thread. I just finished up putting a clutch in a 2015 Mustang today.
There is NO Bleeder??? I was sitting there looking at it thinking , this should be fun . I filled the slave then bench bled it by submerging the line in fluid . Then I hooked the hose up loosely before I bolted the trans back to the motor, and when I pushed the trans back on the motor, it spit a bunch of fluid out .
I was surprised , that when I lowered it down, and tried it, it was already bled and h ad a perfect pedal . I was expecting to have to fk with it for a while to make it work
Hope yours pans out for you