|
OK, the bracket bolts are out (M6 by the way), the sensor is still in the bracket. I cannot move the bracket away far enough from the bellhousing to clear the pivot tit. I can pry on it with a screwdriver (but I'm afraid to apply more pressure), and the bracket is free and loose, but I can't clear the tit (I'm assuming that the sensor is preventing the necessary front to back movement). Any suggestions?
__________________
'86na, 5-spd, turbo front brakes, bad paint, poor turbo nose bolt-on, early sunroof switch set-up that doesn't work.
Malo periculosam, libertatem quam quietam servitutem.
|