|
Yes and no. I never hook up gauges with the compressor on. You can, but why? Bleed the lines with compressor not engaged. Crack the center hose from the manifold loose, open each side independently, close, then the charge hose line by opening tank valve, tighten charge hose at manifold.
Getting it dialed in right takes some time, today it is cooler than yesterday, delta, bla bla bla. No system is the same, vent temp and line temp measurements will help.
Let me know if you are uncomfortable with this, Steve. Nothing but a ride down I 10 to me.
__________________
83 944
91 FJ80
84 Ram Charger (now gone)
|