Quote:
Originally Posted by proporsche
was the engine out recently?
Anyway to remove it is easy...hose clamp then you have 3x 10mm wrench nuts..2 phillips screws on the right side which hold the breather hoses onto the bracket ..disconnect the wire plug and remove
Ivan
|
I got a replacement from Stoddard NLA and succeeded in removing the old one. Unfortunately the air flow meter gasket is not included and so I have to wait for that.
It turns out the plastic is all there, it's just the part with the phillips screws is broken off, so I don't know whether it just got old and brittle or what. I can't see how it would have any great amount of stress, with the flexible hose attached.
