Hi Michel,
Yes I get 10+ volts on the plug end of the Wiring Loom when the FP is running.
On the below quote I was checking voltage on the actual WUR plug but that would make sense that it is 0.0 as there is no power too it..
Does that make sense?
Brent
Quote:
Originally Posted by Vereeken
I do not understand what you are trying to say:
"Checked Voltage at WUR plug is 0.1v, definitely not 12v. 100% have 11.5v at plug end when FP is running."
If you disconnect the elec plug to the WUR what voltage do you see with a multimeter at the plug part of the wiring loom with the FP ON? This should be 10+Volt.
|