Quote:
Originally Posted by Vereeken
I think your WUR is fine. If the bimetal gets hot when connected to the plug all is well.
So why does your WCP not rise?
Is it the picture or does your wur inlet screen full of junk?
If the plug to bimetal connection would be broken you would not be reading 32 Ohms at teh plug.
|
Michel,
The yellowish disc you see in the inlet is the sintered filter media. A common replacement for the stainless mesh. Best way to test the WUR if it is clogged or restricted is to run fuel through with the
PIN removed and monitor the flow pressure. Over 10 psi. (without pin) means flow restriction is occurring.
Tony