Quote:
Originally Posted by Mike8819
Hey gang, Im back with my SC in hand. I've begun the teardown.
Question - how do I remove the taillight assembly housing wiring plug? I don't want to break any wires. I am going to remove the entire assembly for paint and to refurbish
|
From inside the car with the male 6 pin plug removed, use a dull flat blade screwdriver to push the edge of the rubber lip in towards the middle and angle it out the back.
Once you get a little pushed past the sheet metal it will go easier.
Use Dow 111 to lubricate the rubber when you go to install them back in.
__________________
Dennis
Euro 1978 SC Targa, SSI's, Dansk 2/1, PMO ITBs, Electric A/C
Need a New Wiring Harness? PM or e-mail me. Search for "harnesses" in the classifieds.
|