Quote:
Originally Posted by Cheshire Cat
Ha! I have the same ECU! Wondering about your start up and warm up fueling... What do you use to control your idle?
|
Since I am running ITBs I don't run any mechanical helpers or motors.
I run a few correction tables for fuel and ignition which do a fabulous job. Idle is way better then before switching to ITBs. The correction tables below is what helps a lot
Idle Trgt: Target Idle in correlation with temp
Idle ign contol: any deviation from target idle will be corrected via advance
idle ign VS CLT: advances my ignition based on temp
warmup enrichment: just a bit more fuel based on temp
Those settings helped a lot for start up and idle.
Best!
