Quote:
Originally Posted by GH85Carrera
There was no room to attach any type of tool to turn the socket. For a 1/4 socket to have the force to rotate it has to be seated dead on straight and square, and the area is just too small to fit a extension or ratchet the the socket and have the socket turn the screw, it would just slip off the screw head. If it was a 1/2 or bigger socket the angle can be just a little off of dead square and still work.
The box end made it a 10 second removal or installation and super easy. The threads are very coarse so just a couple rotations and it is tight.
|
Ok, so you are saying the socket could not stay seated squarely on the bolt.