|
Well had a break through on Sunday morning! Found the issue why my WCP was not rising.
Throughout the process I have been testing the power to WUR plug with Test light.., light works so all good.
When I have been bench testing my WUR Heater, bi-metal strip etc I've been using a spare battery and a Plug I wired up to it... test results other than pressures all seem to work.
It just wasn't making sense to me why it wasn't working on car when it was on the bench.. so I plugged the Test Battery and plug onto the WUR with the gauges connected and it straight away raised the WCP... YES!
Turns out I only have 10.3v at the WUR plug... and 13+ volts from battery on charge... So I obviously have a connection/break issue along there somewhere. Will investigate this more but may just tap into the rear fuse panel with a relay or another solution to get me running quickly and leave that for some spare time.
Again Tony has helped hugely with emails and Telephone discussions to get me testing and figuring out what is going on... I certainly know my WUR inside out!
Thanks Team.
|