Quote:
Originally Posted by Van B.
You can’t remove the articulating ball without destroying arm. Compliance would come from the outer control arm bushing. You can argue with me as I try to help. But you’ll just end up finding out what I’m already telling you. Spend $100 and buy new ones, but only if the rubber boot is shot or if you can feel play.
If you are referring to the EPS version of this arm, that’s an absolutely stupid part as it turns the thing into a spring. This part is not meant to have resistance to up and down travel.
I’m already seeing why I avoided forums for so long…😏
|
I’m with Van. I recently replaced with new ones. Easy, and made my alignment go much smoother