Quote:
Originally Posted by winders
That piece that the red arrow points to is for the spring plate, not the control arm.......and that rose joint the red arrow points to has severely limited movement because you mounted it wrong....you need misalignment spacers on each side of the rose joint.
|
not sure about that either:
"The Tarett adjustable drop link we are using has the ability to be attached to the swing arm or the banana arm. When installing in the swing arm the included eccentric nut/spacer will replace the eccentric nut in the swing arm. This nut is used to set the toe adjustment in the rear suspension. Installing the drop link in the swing arm will give the sway bar a little softer feel. Also, if you install it in the swing arm you should get the alignment checked after installation to insure proper toe in. Follow these steps for adjusting preload after installing in the swing arm."