|
Oops! too late now. I sprayed a coat of POR15 Rust inhibitor8hrs ago. It is dry to touch now. The car is outside to bake in the sun. In any case I will be doing the body work over the next 6 months. I just wanted to protect the sand blasted metal. I had to use the wire wheel brush all over to get off the flash rust after the wet blasting. From this point on it will be BASF paints and primers. When I figure out how to, I will post some images. It is strange that POR uses Varsol as their solvent. I could not clean the gun with gun-wash. Once it is hardened I will check what solvent will take it off on a test patch. I would like paints which would flash with the previous coat instead of depending on mechanical interlocking. My preference would be a 2K urethane. I am not a fan of water based colors. Clear coats give a nice depth, but I like to do it the old way.
Thanks a million for your advise. I have printed all these in case I lose it.
|