He drive a 1985 911 with M&S tires and at full American ride height.
He covers the entire front of the car with blue painter's tape. Remove the paint, wash and it looks great. He ends up with a ball of tape the size of a basketball when he removes it all.
I am still having fun with the Elky steering column.
https://youtu.be/o_pPkQz5YXc?t=2225
Likely none of you care at all, but this video at 37:00 minutes in is the part where I stopped today. It is cued up and ready for how he does it. Of course he has the column on a bench and not in the car. The stalk for the turn signals, washers, high beam, and windshield washer is a total Rube Goldberg setup. And that is a disservice to Rube Goldberg, he never made anything so stupid. The high beam switch is in the dash just behind the front of the dash. A rod pushes on the switch, and the rod is pushed by a weird piece of plastic and that is pushed by the stalk. None of it is held in place with anything more that grease and the pieces all fall out if you breath too hard. I did it before so I can do it again.