|
Basicaly making your own spacer, cut round tube to the length you need, then make two caps, drill hole in one side slide bolt through then weld, cap on weld the opposite side cap on, the weld on the u shaped bracket that i sent a picture of on the opposite side of the bolt, spacer is done, this way the shock doesnt have to go into the hole,
shock you will have to put a heim joint on the threaded side, who ever made you shock will have them
bolt shock to spacer(u shape clamp) slide the shock in hole and bolt spacer to frame, the only problem i dont know how much room your gonna have for travel if you car is really lowered, you should set the car at ride height measure the distanec from where it bolts to the car to the shock eye, compress the shock to this length and check to see if there will be enough travel on the shock, Kevin
|