Quote:
Originally Posted by mikedsilva
Congrats, glad to see you are up and running.
Question on using 2 individual syncrometers.... do they both read identically? Ie, if you swap them left to right, do they give the exact same reading?
|
Yes, I did verify they read the same, I actually use just one to set each throttle body so they are the same and then will use both to set the side to side balance. The side to side is dependent on you getting the linkage set up so that as you give throttle, both sides are opening at the same time- if one side has a slightly tighter adjustment, that side will open more than the other.