Good day Byron, thank you for asking.
I am not sure how the 944S motor runs it's Fuel Feed and Return Lines, but if similar to this 944S2 motor, then I can help.
I am presently in the process of making up some new ones for a S2 Motor being installed in a 924S chassis....
The difference is in where the lines are run along the chassis floor. The early 944/1 and the 924S have their lines run along the Driver's side floor.
The later 944/2 and others including the turbo run their lines along the Pass side floor and up inside the Right Front Fenderwell, passing over the hot exhaust as they reach the motor and fuel components.
You may notice these hoses are not fully crimped.
I did not have exact hose lengths, and sent them to the owner partially assembled, to fit and cut the hose to his personal preference. He will then return them to me for final assembly and crimping.
I am happy to help you.
My hoses are E-85 Rated and are made to order. They have not been sitting on a dealer's shelf for who knows how long.
Once I have a base of info on hose lengths and fittings for a given model, I can make up just about any configuration you may need.
For more info, please email me. My pm box always seems to be full.
Len.Cummings at verizon.net
Thank you.
Len