Quote:
Originally Posted by 911Obbie
I was very methodical wth the engine rebuild. Same approach here.
Was hoping the ABS relay change out would be the simple fix.
Will test ABS signal paths first.
Then power.
Then get codes read ie FCU and ABS unit relays.
If all is good then I've got to look at speedo.
Will keep all updated.
|
- Speedometer pin4 goes to R24 pin5 (FCU for control unit)
- R24 pin6 (input signal) goes to Wiring Diagram grid C35
- Grid C35 refers to ABS control unit pin17. (FRONT LEFT)