Quote:
Originally Posted by Dmitry at Pelican Parts
. . . Please note the covers will cover over the fog lights, however the turn signals remain visible through the oval cutout. The turn signal cutout can be covered over with optional turn signal cutout plug (sold separately). For cars with headlight washer nozzles in the corners, the washers will need to be popped out and removed before installation and the covers will cover over the hole completely.
|
For the first generation headlight cover would someone please mind clarifying . . .
For this upgrade, are the washers that “need to be popped out” the black nozzles as shown below;
Or does the headlight need to be removed and the entire triangle piece from the washing assembly the piece that needs to be removed (as seen in the photo below);
I am sure from Dmitry’s description only the black nozzles need to be removed leaving the headlight to look like the photo below . . .
I just want to be sure. . . that portion of the headlight where the nozzles pop into does seem to be raised and may interfere with the headlight cover.
Thanks in advance for the clarification.
