|
umop apisdn
Join Date: Jun 2014
Location: Brisbane, Australia
Posts: 642
|
Regarding the VE2 table.
the all 1s is a Microsquirt default, not of our making, as we don't supply a base tune.
therefore out of the box some settings are at odds with what we need to get things running
- 50% center on frequency valve is half the range of 0-200 in the VE Table
The VE2 table is only used in K-Jet lambda, and only if Dual table is turned on in the firmware
so the baseline cell settings in both VE1 and VE2 should be 100 if using dual tables
Otherwise VE1 is used for both the Frequency Valve ratio and the eWUR pressure offsets, and VE2 can be ignored
The intention is to have the system enabled in stages as needed.
beginning with just the warmup curve and the rest set to baseline
adjust the mechanical side to factory specs
then progressively enable and adjust the FrankenCIS side to suit
__________________
Steve
1981 928S 4.7 ROW with KE3-Jetronic
"Be the man your dog thinks you are."
www.FrankenCIS.com
|