|
Registered
Join Date: May 2015
Location: Secret lair deep underground
Posts: 1,810
|
FWIW I am using in dual table mode, I use the WUR settings for a base and then did some minor tweaking in the FW. I figure one is for gross changes, but works slower, the other for fine changes and works more quickly. I can see mixture changes within 1/10 second.
Currently not running in closed loop mode, probably never will. I would like to run in closed loop for idle < 1,500 much like the stock CIS but the software won't let me. You can only set closed loop ABOVE but not below a threshold
__________________
'86 no-sunroof 930 coupe: Emissions removed, FrankenCIS controlling eWUR, lambda, COP ignition. Tial f46P 1.0 bar spring, SC cams, K-27/29, lightweight clutch, TK Longneck intercooler, RarlyL8 headers and dual-outlet hooligan
'14 Jaguar XK-R: Bullet proof windscreen, rotating number plates (valid all European countries), martini mixer, whatever you do don't press this red button!
|