Quote:
Originally Posted by SamC.
Have you considered using bull-nose corner tile for that portion of the shower? If I am interpreting your remarks correctly, that may be a solution. I recently did a full renovation
( studs up) on a guest bathroom, ran into similar issues. I did all the grunt work, framing, etc - let the professional tile-setter do his thing. Corners were "goofy" had a difficult time fusing the new onto the old. Bull nose was the solution. Final product was deemed quite worthy by the Boss ( My bride) Hope this helps some.
|
There is not bullnose available for our tile. Will be using Schluter metal on the unfinished edge. It will need to stop short of the corner though. There will be about 1-2" between the metal and the edge of the corner.