|
Registered
Join Date: Apr 2011
Location: behind the redwood curtain, (humboldt county) california
Posts: 1,454
|
Check with the technical/service dept of the stain manufacturer
I have wrapped beams and done a moderate amount of staining/refinishing. My recommendation is to shoot the pics to the manufacturers tech/service department and ask for their advice.
It would be a sad waste to gum up/disolve/or discolor what you have worked so hard on. I am a little gun shy, having just started into automotive painting and all of the incompatibilities/problems with different chemysteries:-)
I have no experience with distressed finishes.
Good Luck
chris
|